Completely solve the WIFI wireless router no signal problem
  • Is not at home to find the router signal is not awesome. Another room is often dropped. Another high-power How to strengthen WiFi signal reception, router and mobile device setting method still can not solve the problem.


    try this method to ensure that no signal dropped problem.


    Prerequisite: need two wireless routers


    First of all need a wireless router to be able to access the Internet (the best choice of a dual-antenna high-power network connection is better). Here to skip setting up the router network. Focus on setting another router


    First log in to the network with a wireless router, use your current networked computer log in


    Enter http://192.168.1.1 < Default account admin password admin part of the router default account guest password guest specific router account password to read the instructions, or check the Internet


    into the basic settings - the channel is changed to 9 save and restart the What is wireless card for wireless network card


    There is a network of wireless routers set up do not care.


    The key part:


    put another wireless router power plug in the phone or computer to connect this wireless router the same way to log in


    this When may encounter unable to search this router wireless signal.


    Solution: Your router may not open wirelessly. Use a network cable to connect your computer. Log in with your computer


    After logging in. Select the DHCP server to select the DHCP service Not enabled (IP will be assigned by network router, this route does not assign IP) Save and restart router


    Select the LAN port to set the IP address to 192.168.1.2 (for later use this address to log in The router) to save and restart the router


    Remember to use http://192.168.1.2 to log in to the router


    wireless settings - the basic settings - in accordance with the picture has been finished. You can not even drop the new wireless now. Fast speed.


    The following is a scan SSID diagram


    Although the signal strength value of 36dB (equivalent to a cell phone signal) but the speed will not be dropped.


    After setting the new wireless router anywhere in the house without fear of no signal. Where did not place a signal which


    remember to set a new password for the wireless route.


    Reminder: Because only one channel setting with network routing is changed. Once you set the wrong result of the problem will not affect your normal Internet access.


    However, if you do not have a network cable you can set the wrong route to restore the factory settings. Press the small button on the router 3 seconds part of the router is a small hole. Insert the toothpick behind the hole in the routing for 3 seconds


    If you have a good bridge to log in the new What type of fiber terminal box, fiber terminal box classification [Graphic] is the address for the http://192.168.1.2 instead of http://192.168.1.1 (This is a network router )

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!